10+ Planter With Post For String Lights. Here’s how to make your own planter posts to hang string lights off of: Mix the concrete with water and shake the planter to ensure air.
Backyard lighting whiskey barrel planter Backyard makeover, Backyard from www.pinterest.com
Planter post for string led lights are an incredible expansion to any lawn or patio, chiefly. Marking the center of the post. They were connected to 1×1 posts which were zip tied onto the railings.
The Concrete Should Fill About 1/2 To 3/4 Of The Barrel To Provide Enough Stability For.
Again, i mitered the edges and dry fit the boards, then went back over with wood glue and my brad nailer. Place the planter on level ground and use a level on one side to make the post. This diy patio area with sturdy planted posts is the perfect way to improve a small yard on a small budget.
Set Planter Barrel In Place And Mix The Concrete In The Barrel.
Predrilling holes into the planter. Planter post for string lights driven trim globe lights. Attaching the planter to the 4×4.
Measure The Distance Will Let You Know What Length Of Light Strand You Need.
For a full supply list complete with direct links to all the exact products. Add ambiance to a patio or any outdoor gathering area with your own string light planters. Drill (for drainage holes) potting mix.
Repeat Until All 4 Sides Are Built.
They were connected to 1×1 posts which were zip tied onto the railings. Mix concrete into your planters following the bag’s instructions. Place the unpainted end of a 2” x 2” x 8’ post in each of the planters.
The String Lights We Had On Our Deck Were Pretty Basic.
Drill (for drainage holes) potting mix. Planter post for string lights wood post that is tough adequate to direct the heaviness of your string lights and extensive adequate to outfit leeway underneath the lights. Mix the concrete with water and shake the planter to ensure air.
